Your Water Line Installation Experts Since 1985

Remember when the ice maker in your house was, well, you? Filling the trays, trying not to spill them as you put them back in the freezer. Popping out a couple of cubes when you needed them, only to find that someone put the tray back in with one lonely cube left.
Yeah, thank goodness for ice makers, right?

But ice makers require a connection to your home’s main water line. So, unless you enjoy refilling ice trays that much, being without an ice maker or stuck with a malfunctioning water line is not something you want to deal with for too long.

Whether you need to connect a new refrigerator or ice maker to the water supply, or have a leaky water line, count on our team to get you up and running quickly.

Notice Any of the Warning Signs?

Call the team that’s been the go-to provider for water line service in St. Louis for more than 40 years. Get an expert water line installation today.

Comprehensive Refrigerator and Ice Maker Water Line Services

Water Line Installation

Installing a new water line means tapping into your home’s existing water supply to run a small, flexible tube directly to the back of your refrigerator. Our team locates the closest cold-water pipe, taps into the supply line, and runs a small tube from the new valve to the refrigerator. We’ll flush the line to clear any debris, hook the tube to the water inlet valve, and slowly turn the water supply back on, checking each joint for leaks. Installation ends with connection, flow, and leak tests.

Water Line Leak Repair

Water line leak repair begins with shutting off the water supply, locating the exact source of the leak, and diagnosing the failure point. Issues typically crop up in supply line tubes because of age, or damage from being pinched by the refrigerator. Loose fittings, damaged connections, or a cracked water inlet valve could also be culprits.

Once our tech determines the source of the problem, they’ll provide you with a written estimate for your review. Upon approval, the tech will begin repair work, whether that’s tightening or resealing the fittings or splicing the tubing If the issue is more than a simple loose fitting or a pinched line, they may recommend replacement instead.

Water Line Replacement

If your existing water line is cracked, pinched or otherwise malfunctioning you’ll need to upgrade. Purchasing a new fridge is an ideal time to assess the existing line. Our team checks the tube material, as well as the location and age of the set up. When it comes to new water line tubing, you have a few choices:

  • Plastic: cost-friendly and easy to work with, but prone to splits and leaks
  • Flexible copper: more durable but can sometimes puncture or kink
  • Braided stainless steel: The most durable, and the most expensive

When to Replace the Line

If your ice maker water line is:

  • Old or discolored. Plastic turns a yellow-brown color as it ages. It also becomes brittle over time and once it suffers a crack, you can expect new cracks to follow. Waiting to replace it could mean a burst line, leading to much more expensive repair.
  • Kinked or split in more than one place. Kinks, creases, or tiny pinholes in the line mean it’s lost its structural integrity. If the line needs to be spliced in more than one spot, you’re setting yourself up for failure down the road.

Old water supply lines carry debris that can clog a new fridge’s water filter and internal valves. Most appliance manufacturers and installers recommend replacing the water supply line when you purchase a new refrigerator. And each manufacturer specifies the most suitable material for their appliances. Whirlpool recommends copper or PEX, for example.

Shutoff Valve Installation & Replacement

Any appliance in your home that’s connected to a water supply should have a dedicated shutoff valve. The shutoff for your ice maker should be located on the wall behind your refrigerator, usually in a recessed plastic box. If yours is leaking or stuck in place making it impossible to turn off, it’s time to have it replaced. If your new refrigerator has an ice maker where your old one didn’t, you’ll need to have one installed.

Planning Your Refrigerator Water Line Installation

Consideration #1: Appliance requirements


  • The model and manufacturer’s connection requirements
  • Appropriate supply materials, fittings, and pressure
  • Whether an existing hookup can be reused

Consideration #2: Water Source and Line Routing


  • Location of the available cold-water supply
  • Distance and access between the supply and the refrigerator
  • Routing through cabinets, walls, or an accessible basement

Consideration #3: Tubing and Connection Materials


  • Appropriate materials for the appliance and installation
  • Protection from kinking, crushing, and abrasion
  • Avoid a universal “best material” ranking

Consideration #4: Shutoff Access and Appliance Clearance


  • Accessible valve location.
  • Sufficient clearance for connections.
  • Room to service the refrigerator without damaging the line

Your refrigerator manufacturer’s instructions should include recommended material and connection choices.

Water Line Care and Leak Prevention

  • Check accessible connections and surrounding areas for moisture.
  • Avoid pinching the tubing when positioning the refrigerator.
  • Know where the water shutoff is.
  • Assess any questionable connections before installing your new refrigerator

FAQs

Frequently Asked Questions

Yes, by tapping into a nearby cold-water source, usually the supply line under your kitchen sink.

Most appliance manufacturers strongly recommend upgrading to a braided stainless-steel line.

Water leaking behind a fridge is usually caused by a damaged or loose water supply line or a faulty water inlet valve. If you notice pools of water under or behind your fridge, call a licensed plumber. Drain-pan, defrost-drain, and internal appliance issues may require appliance service.

Absolutely. If water flow is restricted your ice maker could produce small or hollow cubes or stop production completely. There are several potential causes for this including a clogged water filter, a pinched water line, or low water pressure.

Yes. Our plumbers will install a quarter-turn ball valve and can also install a recessed ice-maker outlet box.

Our team handles the plumbing supply line. We recommend contacting the manufacturer for any repairs or replacements to the appliance itself.

Trust the St. Louis Water Line Installation Experts