Planning to add a gas stove, replace a water heater, or update gas pipes? You’ve landed in the right place. Our licensed plumbers can check your existing gas line, explain your options, and recommend the right installation or repair for your home.

Signs You May Have a Gas Leak

A gas leak requires immediate attention. Signs of a possible leak include:

  • A strong “rotten egg” smell in your home
  • Dead or discolored grass or shrubs near a gas line
  • A whistling sound near appliances or pipes
  • Dust blowing near a pipe

If you suspect a gas leak, leave the area immediately. Do not try to locate or repair the leak, operate electrical switches, or use your phone until you’re safely away from the area. Call 911 and Spire’s emergency line at 800-887-4173 from a safe location. Stay away until emergency personnel or your utility company tells you that it’s safe to return.

Gas Pipe Services in St. Louis

Gas Pipe Inspections


If you’re unsure of the condition of your gas pipes, we can help. Our team will check for damage, improper connections, and other potential safety concerns. And if you’re planning to add or replace a gas appliance, we can determine whether your existing line needs any changes.
During an inspection, our plumber may check:

  • Condition and type of gas line
  • Pipe routing, supports, fittings, and connections
  • Accessible shutoff valves
  • Signs of corrosion, damage, or leaks
  • Gas pressure and line capacity, when applicable

If needed, we’ll perform a pressure test to check whether your gas line holds pressure. A drop in pressure can indicate a leak that needs further investigation.

Gas Leak Detection and Gas Pipe Repairs


Gas leaks can develop when pipes are damaged, connections wear out, or appliances are installed incorrectly. Once emergency personnel or your utility company has addressed any immediate danger, our team can assess the line, explain the repairs needed, and provide you with a written estimate.

Repair costs depend on where the problem is, how much of the gas line is affected, and how easy it is to reach. We’ll explain the recommended work and costs before getting started.

Gas Pipe Installation


A new gas appliance may need a new line, an extension, or changes to your existing piping. We’ll check whether your gas lines can supply the appliance and explain any work needed before installation.

Depending on the project, we may also need to coordinate with your gas provider and arrange permits and inspections.

Planning Your Gas Pipe Installation

Whether you’re adding your first gas appliance or moving a line during a remodel, we’ll help you work through the details—from the pipe route to the permits needed.

Several decisions must be made along the way, including:

  • Trenching location if underground piping is needed
  • Entry point to your home
  • Meter location (if this is a new installation)
  • Line size, materials, and any protection needed along the route
  • Whether to extend an existing gas line or run a new one

Gas Pipe Materials

Gas pipes carry natural gas from your meter to the appliances in your home. Depending on the project, we may use steel pipe or flexible corrugated stainless steel tubing (CSST). We’ll recommend materials that suit your home’s layout, the amount of gas your appliances need, and local code requirements.

Gas Line Installation Costs

The cost of a new gas line depends on how far it needs to run, how easy the area is to access, and which appliances it will serve. Materials, permits, inspections, and any necessary digging or changes to finished walls can also affect the estimate. We’ll explain what your project involves and provide a written estimate before work begins.

Gas Pipe Maintenance

Have damaged or corroded gas piping evaluated by a qualified professional and ask whether an inspection is appropriate before adding or replacing gas appliances. Your plumber can recommend maintenance or repairs based on the condition of your system.

FAQs

Frequently Asked Questions

Look for a plumber with gas line experience and the licensing and insurance required for your project. Ask whether they regularly handle gas line installations and repairs in your area.

A pressure test checks whether your gas line holds steady pressure over a set period. If the pressure drops, we’ll investigate the cause, make any necessary repairs, and test again before the line is used.

In many cases, they can, as long as the gas line is sized to supply the combined demand of the connected appliances. Tell your plumber about all planned appliances, including any you might add later, so those needs can be considered.

Your Gas Pipe Specialists: Fueling St. Louis Homes Since 1985

We’ve been helping St. Louis homeowners since 1985. Whether you need a gas line for a new appliance or repairs to an existing line, we’ll take the time to explain the work and answer your questions. You’ll receive a written estimate before any work is started.